For the average family, the kitchen area is relatively small. Therefore, the cleanup of the kitchen area has become the first place for housewives to keep an eye on.
Range hood:
Magic wrap
Before using the oil storage box of the range hood, a layer of plastic wrap can be placed in the box, and a part of the wrap film is left outside the box. When the oil is full, just change the plastic wrap. It is also possible to pour the bottom of the detergent in the box so that the oil always floats on it and it is easy to clean. During the use, do not turn off the range hood immediately after cooking, let it continue to operate, can remove the fumes and water vapor left in the air and carbon monoxide that is not completely burned, reducing the chance of indoor kitchen stains contaminated with oil. .
When the range hood is being cleaned, open the range hood to let it run, spray the concentrated stain remover onto the fan, spray the warm water after 5 minutes, the dissolved oil will flow into the oil storage box, and directly remove the oil storage box to clean. . The panel of the range hood is relatively simple to clean. It can be sprayed with a cleaning agent first, then a paper towel to make the cleaning agent decompose the dirt; after half an hour, it is peeled off, then gently wiped with a sponge, and the cleaning agent is absorbed by a paper towel, which can be sucked. Take most of the oil.
Kitchen walls and floors:
Good alcohol decontamination effect
Wiping the kitchen walls and floors is the only way to keep the kitchen clean and away from soot, and alcohol can be a good helper. Alcohol has the property of dissolving oil and fat, and diluting alcohol to a concentration of 75%, which not only can be used to wipe oil, but also has excellent bactericidal effect. The characteristics of alcohol quick drying are also more anti-mildew than water wiping.
In addition, for the higher wall of the kitchen, use a T-type mop to clean, put a rag on the mop, apply detergent, and repeatedly drag until the wall is completely wiped clean; the lower kitchen wall can be sprayed with stain remover, then Stick the white paper and wipe it again after about half an hour.
Stove cleaning:
It’s best to hit the iron
When cooking, there is often a splash of juice on the stove. After finishing the dish, wipe it with a damp cloth with the residual heat of the stove. The cleaning effect is better. For the old dirt of the stove and the stove, under normal circumstances, the cleaner can be sprayed on the stove top, then the old newspaper is put on the floor, and then a layer of detergent is sprayed. After standing for a few minutes, the newspaper is pulled off and the detergent is used. The newspaper wiped off the oil. If the dirt cannot be disposed of, remove the burner and the hob and place it in the sink. Brush the heavy dirt on the stove with a metal brush, pour 40-50 °C hot water into the sink, add appropriate amount of bleach and kitchen oil cleaner, soak for 20 minutes, stubborn old heavy scale Can be cleaned up.
Concerned about surprises
Label: How do kitchen fumes kill?
Previous: Floor products: the thicker, the better the quality Next: Buy cabinets to avoid "four big mistakes"
Electroplated Diamond Flat Lap Disk
Hans Flexible Diamond Discs/Flat Lap Grinders are suitable for wet or dry grinding and polishing a large variety of hard materials including granite,marble,terrazzo,natural stone,engineered stone,glass,ceramics,lapidary and hard metals.All flexible diamond discs, with various fittings for hand and stationary machines,are colour coded for easy grade identification with the most popular sizes and types available from stock.Diamond has developed an excellent specification for the porcelain industry which meets the very high quality requirements for smooth bases on plates, cups, saucers and other tableware in a variety of applications, both on machines such as Lippert, and for manual operations.
1.QRS backed diamond discs and diamond flap discs will offer you the best price / performance ratio. High stock removal, equal finish and a long life. Ideal tools for stone, glass, ceramic, porcelain etc.
2.Diamond Pads for Orbital Sanders:Triangle and square shaped sheets with airholes to be used on orbital sanders. The diamond sheets will combine high material removal with a smooth finish. Can be used on almost all hard materials and even on hard wood.
3.Diamond Discs for Angle Grinders: Wet grinding and polishing discs for manual angle grinders
4.Large Diamond Discs for Glass:Large discs for flat lapping operations available in metal and resin bonded types.
5.Wet grinding and polishing discs for manual angle grinder:The perfect choice of discs for every glass worker.
6.Diamond Flap Discs for grinding stone with manual angle grinders:Unique flap disc with diamond flaps for very high stock removal but yet with a smooth finish.
7.Dry grinding and polishing discs for manual angle grinders:Different types of diamond grinding and polishing discs to work on various types of stone.
8.Dry cutting / grinding diamond discs for manual angle grinders:Very aggressive, fast grinding and cutting discs. Can be used on various stone types.
9.Sheets, discs and triangles:Orbital sanders with flexible diamond tooling are ideal for paint removal or pre paint operations.
Hans 6" and 8" Diamond Disc and Laps is the perfect tool for the commercial cutter or serious hobbyist. Diamond top plates just 1.0mm thickness is easy to apply to backing plates. All diamond top plates can come with PSA, Magnetic and Without Backing. Diamond discs are available in a wide range of mesh sizes for rough grinding and fine grinding of all precious gem material applications include performing rough and fine grinding on faceting material plus general lapidary grinding when precision is required. A controlled concentration of diamond bonded onto a precision backing plate ensures consistent grinding and surface finishes. Diamond discs can put on a precision ground.
10 inch to 24 inch Diamond Magnetic Disk was a very rough diamond used for heavy removal of glass from surfaces. It will create significant edge chipping that will need to be cleaned up with a rough to medium grit diamond disk. Disks are magnet backed for easy application and removal on lap grinder wheel heads.
Hans Diamond Pattern Disks are an electroplated diamond disk with a controlled dispersion of diamonds on the surface in a pattern. In order to maintain the longevity of the diamond disk, the StarLap disks precisely place the diamonds on the disk instead of using a random dispersion like our own electroplated diamond disks. This gives a consistent grind on your glass by controlling the spacig between the diamonds and allows a slightly longer lifespan on the disk as the diamonds maintain more space between them and support the glass less.
Diamond Standard Faceting Laps
The standard is designed to exceed the most rigid requirements. The aluminum backs are ground flat and parallel to exacting standards. All standard discs are made with 100% diamond and bonded with a hard electroplated nickel. Comes with 1/2" arbor. Screwbacked discs also available.
Diamond Channel Faceting Laps
These discs have a uniquely shaped working surface of randomly interspersed islands. The resulting channels flush away debris and prevent the stone from pulling excessively on the lap. These are great for rough cutting facets and grinding cabochon backs.
Diamond Rippled Faceting Laps
The rippled diamond laps have a textured surface that allows more contact of the diamond surface because the debris is whisked away through the channels. Each rippled diamond top plate is professionally bound to an aluminum master lap.
Electroplated Diamond Disk,Diamond Flexible Polishing Disc,Diamond Flexible Glass Polishing Pad,Glass Flat Lap Grinders,Diamond Faceting Flat Lap
Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com