When it comes to CNC cutting machine industry is not unfamiliar, but CNC cutting machine is divided into a variety of cutting methods, a variety of CNC cutting machine has its own advantages and disadvantages. Well, today's Wuhan Tuosheng Technology Co., Ltd. introduced in detail the advantages and disadvantages of the use of CNC flame cutting machine:
CNC flame cutting: CNC flame cutting machine is a cutting method that CNC machine tool uses gas with oxygen or gasoline with oxygen to cut metal materials.
Advantages 1.
Can cut very thick carbon steel, it has a wide range of cutting, can cut 6mm-200mm thick steel plate;
Advantages 2.
The price of the flame cutting machine is relatively low, and the input cost of the early stage is also low.
Disadvantages 1.
Preheating and perforation required for cutting are long and the cutting speed is slow;
Disadvantages 2.
The thermal deformation during cutting is large, especially when cutting (0.5-6 mm) sheets, the cutting accuracy is not high.
Disadvantages 3.
Can not cut copper, aluminum and other non-ferrous metals and stainless steel.
Disadvantages 4.
The way of burning fuel is more serious for environmental pollution and it is not environmentally friendly.
Although CNC flame cutting thin plates (0.5-6mm) have been gradually replaced by plasma cutting in the cutting field, CNC flame cutting is still in a pivotal position in cutting thick plates and midplanes, and flame cutting is at its price advantage in thin plates. Cutting has always occupied a certain market share.
CNC flame cutting: CNC flame cutting machine is a cutting method that CNC machine tool uses gas with oxygen or gasoline with oxygen to cut metal materials.
Advantages 1.
Can cut very thick carbon steel, it has a wide range of cutting, can cut 6mm-200mm thick steel plate;
Advantages 2.
The price of the flame cutting machine is relatively low, and the input cost of the early stage is also low.
Disadvantages 1.
Preheating and perforation required for cutting are long and the cutting speed is slow;
Disadvantages 2.
The thermal deformation during cutting is large, especially when cutting (0.5-6 mm) sheets, the cutting accuracy is not high.
Disadvantages 3.
Can not cut copper, aluminum and other non-ferrous metals and stainless steel.
Disadvantages 4.
The way of burning fuel is more serious for environmental pollution and it is not environmentally friendly.
Although CNC flame cutting thin plates (0.5-6mm) have been gradually replaced by plasma cutting in the cutting field, CNC flame cutting is still in a pivotal position in cutting thick plates and midplanes, and flame cutting is at its price advantage in thin plates. Cutting has always occupied a certain market share.
Side Emitting PMMA Fibre Harnesses
Fiber Optic Side Glow Cable also known as Side Glow, Side Lit, or Lineal light cable is made from stranded or Solid core Polymer with a clear heat shrink jacket. Our stranded Sideglow cable is designed for tighter turns and longer runs, which is suitable for installation indoors or out. They are most often used to provide light lines in paving or stair fronts or for illuminating around the perimeter of swimming pools. Also Stranded is best in wet locations.
Side Glow Fiber Optic Filament,Side Light Fiber Optic,Fiber Optic Side Glow Cable,Led Fibre Optic Lighting
Jiangxi Daishing POF Co.,Ltd , https://www.jxopticfibrelight.com